1/8 Capo Skyline GTR R34 Remote Control Flat Running Drift Car Kit RTR
Capo
$1,945.00$1,945.00
The color is midnight purple II, which simulates the painting color of the real car R34, which was first launched in 1999;
The car shell is made of magnesium alloy with ultra-lightweight (the material is the same as the UAV frame);
All CNC parts and die-casting appearance parts;The vehicle is equipped with rubber tires, and drift hard tires are optional;
The independent front and rear bumpers are made of plastic, which same as the real car;
The differential gear uses powder metallurgy MIM technology, with an accuracy of ±0.02 and hardness of 47-52HRC;
Truly restore the function of the pin-type valve and the same stepless damping adjustment as the real vehicle;
All-metal gearbox. The gearbox gear is made of carbon steel and hardened by quenching;
The axle is equipped with a differential function. The differential gear is made of powder metallurgy material with heat treatment, and uses metal injection molding technology;
The steering component restores the design of the real car, using rack and gear;
The shock absorber is a needle valve shock absorber, and the damping rebound coefficient of the shock absorber can be manually adjusted through the valve on the tower top;
Material: Metal, Plastic, Rubber
KIT Package Includes:
1 Set of Capo 1/8 GTR R34 RC Car Model Body Parts
1pc 2-Speed Transmission
Light System
This Package Doesn't Include:
Motor
Servo
ESC
Sound System
Battery
Charger
Remote Controller and Receiver
RTR version does not include charger and lithium battery, because lithium batteries cannot be mailed by air
The recommended electronic parts are as follows:
Motor: 550 1800KV-3300KV inductive brushless motor/ 550 21T-27T brushed motor.
ESC: ≥ 80A Sensible Brushless ESC/Brushed ESC.
Steering Servo: 26kg-40kg RC model standard size Servo, high speed and large torque.
Steering wheel linkage Servo: 9-18g RC aircraft model standard size metal gear Servo.
Transmission shift Servo: 9-18g RC aircraft model standard size metal gear Servo.
Battery: 11.1V 3S short body LI-PO lithium battery.
Remote control: 4 channels are required as standard, and 2-5 more channels are required for the upgrade.
Lighting system: R-34 LIGHTS HUB KIT with HUB function and 2pcs 25cm steering gear extension cables.
Sound system: There is no RB26 engine sound effect at present.
Battery compartment size: 90*48*28mm
Space dimension of motor fixed position: length ＜ 65mm, diameter ＜ 39mm
Be careful!! High-speed motors above 3300KV are not recommended. Extreme speed control should be carried out under the identity or guidance of a professional-level player, so as not to damage the transmission structure and electronic equipment due to the accelerator and brake control caused by high speed.
The entire car is designed at 1:8 scale, which is the same platform as the classic 1 old games Uk and UKMAX. and the 1:8 series, which will continue to be expanded in the future.
For the first time, magnesium alloys were used to manufacture ultra-lightweight car bodies. (same as UAV skeleton), all CNC parts and die-cast exterior parts are built. The independent front and rear bumpers are made of plastic in the same way as the real car.
Differential speed up to the first upgrade of powder wood gold HlIM process technology, accuracy of 0.02, hardness 47-52HRC.
Original rubber imitation tires, and optional drift hard tires for oP. Can be salty or sweet.
True reduction of needle valve function, stepless damping adjustment consistent with real cars.
New simulation steering mechanism. Two-speed gearbox and real mechanical knot.
